Nas-id – Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) User Manual
Page 532
Advertising
518
Brocade Mobility RFS7000-GR Controller CLI Reference Guide
53-1001945-01
Wireless Configuration Commands
20
nas-id
Wireless Configuration Commands
Use this command to reset nas-id.
Syntax
nas-id <WORD>
Parameters
Example
RFS7000(config-wireless)#nas-id 12
RFS7000(config-wireless)#
WORD
A string up to 256 characters.
Advertising