Service – Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) User Manual
Page 548
534
Brocade Mobility RFS7000-GR Controller CLI Reference Guide
53-1001945-01
Wireless Configuration Commands
20
service
Wireless Configuration Commands
Use this command to invoke service commands to troubleshoot or debug the
(config-wireless)
instance configuration.
Syntax
service[(clear|show|smart-rf|wireless])
service clear (wireless)(mobile-unit)(association-statistics)
service show [(cli|radio-neighbor|smart-rf|wireless)]
service show radio-neighbor (mu <MAC>)
service show smart-rf[debug-config|sensitivity{mu <1-8192>|<WORD>|pattern
{pattern-11a|pattern-11b|pattern-bg|pattern-2Mbps unit}|rates <WORD>}]
service show wireless [ap-history <XX-XX-XX-XX-XX-XX>|buffer-counters|
enhanced-beacon-table{config|report}|enhanced-probe-table{config|report}|
grou<1-256>|group-stats|legacy-load-balance|mu-cache-buckets|
mu-cache-entry <1-8192> <WORD>|mvlan <1-256> |
radio{<1-4096> description|mapping}|radio-cache-entry
<WORD>|radio-hash-buckets|vlan-cache-buckets|vlan-cache-entry <1-8192>
<WORD>|waiting <0-99>]
service smart-rf [clear-history|load-from-file|replay(enable)|rescue
<WORD>|restore|
save-to-file <WORD>|simulate {coverage-hole <1-4096> <UNIT_RANGE>|interference
<WORD>]
service wireless
[ap-history|clear-ap-log
<1-256>|custom-cli|dot11i|enhanced-beacon-table|enhanced-
probe-table|forward-eap-to-wired|free-packet-watermark|idle-radio-send-multicast|
legacy-load-balance|map-radios| radio-mic-cfg|rate-scale|
request-ap-log
<1-256>|rogue-find-range|save-ap-log|sync-radio-entries|vlan-cachesnmp-trap-throt
tle]