Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 374)

360 Brocade Mobility RFS7000-GR CLI Reference Guide
53-1001945-01
Extended ACL Config Commands
14
mark
Extended ACL Config Commands
Use this command to mark specific packets.
Syntax
mark {dot1p8021p <0-7> | dscp <0-63 >|tos <0-255>}} {ip} {source/source-mask
A.B.C.D/M| host sourcehost | any} {destination/destination-mask | host
destinationhost | any} [log] [rule-precedence access-list-entry precedence]
mark {dot1p <0-7> |8021p <0-7> | dscp <0-63 >| tos <0-255>}} {icmp}
{source/source-mask A.B.C.D/M| host sourcehost | any} {destination/
destination-maskA.B.C.D/M | host destinationhost | any} [icmp-type | [icmp-type
icmp-code]] [log] [rule-precedence access-list-entry precedence]
mark {8021p <0-7> | dscp <0-63 >| tos <0-255>}} {proto} {A.B.C.D/M| host | any}
{A.B.C.D/M | host | any} [icmp-type | [icmp-type icmp-code]] [log]
[rule-precedence access-list-entry precedence]
mark {dot1p <0-7> |8021p <0-7> | dscp <0-63 >| tos <0-255>}} {tcp|udp}
{source/source-mask A.B.C.D/M| host sourcehost | any} [operator source-port]
{destination/destination-mask | host destinationhost | any} [operator
destination-port] [log] [rule-precedence access-list-entry precedence]