Ap-containment – Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) User Manual
Page 504
490
Brocade Mobility RFS7000-GR Controller CLI Reference Guide
53-1001945-01
Wireless Configuration Commands
20
ap-containment
Use this command to invoke Rogue AP Containment commands.
Syntax
ap-containment [add <MAC>|enable|interval <20-5000>]
Parameters
Example
RFS7000(config-wireless)#ap-containment interval 20
RFS7000(config-wireless)#
RFS7000(config-wireless)#ap-containment enable
WARNING: Rogue AP Containment should only be used to contain
rogues adversely impacting the network and its devices.
RFS7000(config-wireless)#
add <MA>)
Adds a Rogue BSS MAC to Rogue AP Containment list.The Maximum entries allowed
is 256.
•
MAC – Specify the MAC address in AA-BB-CC-DD-EE-FF format.
enable
Enables protection against Rogue Access Points.
interval <20-5000>
Specifies the time (in milliseconds) between two AP Containment procedures.