Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) User Manual
Page 442
428
Brocade Mobility RFS7000-GR CLI Reference Guide
53-1001945-01
DHCP Config Commands
17
no
Use this command to negate a command or set defaults.
Syntax
no
[address|bootfile|class|client-identifier|client-name|ddns|default-router|dns-ser
ver|domain-name|hardware-address|host|lease|netbios-name-server|netbios-node-type
|network|next-server|option|update]
Parameters
The
no
command negates any command associated with it. Wherever required, use the same
parameters associated with the command getting negated.
The pool has only one bootfile and hence the
<filename >
is not required when using the
[no]
command. To remove a bootfile use
no bootfile
command only.
Example
RFS7000(config)#no ip dhcp pool hotpool
RFS7000(config)#
RFS7000(config)#no ip dhcp pool test
RFS7000(config)#
RFS7000(config-dhcp)#no update dns
RFS7000(config-dhcp)#
RFS7000(config-dhcp)#no bootfile
RFS7000(config-dhcp)#