Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 122)

108 Brocade Mobility RFS7000-GR Controller CLI Reference Guide
53-1001945-01
User Exec Commands
3
clear
User Exec Commands
Use this command to reset the command to previous configuration.
Syntax
clear [crypto-error-log|ccrypto-log]
ounters|crypto|mobility|spanning-tree]
clear counters (bridge)
clear crypto [ipsec|isakmp] (sa) <Peer IP Address>
clear mobility[event-log|mobile-unit|peer-statistics]
clear mobility event-log [mobile-unit|peer]
clear mobility mobile-unit [<MU MAC Address>|all|foreign-database|home-database]
clear mobility <Peer IP Address>
clear spanning-tree (detected-protocols) (interface)<interface name>
Parameters
Example
RFS7000>clear crypto-log
RFS7000>RFS7000>clear mobility event-log mobile-unit
RFS7000>
RFS7000>clear mobility event-log peer
RFS7000>
crypto-error-log Performs clear crypto error log
crypto-log Perform clear crypto log
counters (bridge) Clears all bridge counters.
crypto [ipsec|isakmp] (sa)
<Peer IP Address> Clears encryption subsystem.
•
ipsec – Flushes IPSec SA.
•
isakmp – Flushes the ISAKMP database.
•
sa – Clears all IPSec SA's.
•
Peer IP Address – Clear all IPSec SA's for a given peer.
mobility Clears mobility attributes.
•
event-log – Clears mobility attirbutes from event log of:
•
mobile-unit – Mobile unit event-logs.
•
peer – Peer event-logs.
•
mobile-unit – Clears mobile unit information.
•
<MU MAC Address> – MAC address of the MU.
•
all – All mobile units (Home and Foreign).
•
foreign-database – Mobile units present in the foreign mobile unit
database.
•
home-database – Mobile units present in the home mobile unit database
•
peer-statistics <Peer IP Address> – Clears mobility peer statistcs.
spanning-tree Clears spanning tree attributes.
•
detected-protocols – Clears spanning tree for the detected spanning tree.
•
interface <name> – Clears spanning tree interface name.