Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 132)

118 Brocade Mobility RFS7000-GR Controller CLI Reference Guide
53-1001945-01
User Exec Commands
3
Example
RFS7000>show ?
aap-wlan-acl wlan based acl
aap-wlan-acl-stats IP filtering wlan based statistics
access-banner Display Access Banner
audit-log-filters Display audit log filter rules
autoinstall autoinstall configuration
commands Show command lists
crypto encryption module
crypto-error-log Display Crypto Error Log
crypto-log Display Crypto Log
environment show environmental information
firewall Wireless firewall
history Display the session command history
interfaces Interface status
ip Internet Protocol (IP)
ldap LDAP server
licenses Show any installed licenses
logging Show logging configuration and buffer
mac Internet Protocol (IP)
mac-address-table Display MAC address table
management Display L3 Managment Interface name
mobility Display Mobility parameters
radius Displays RADIUS configuration commands.
redundancy-group Displays redundancy group parameters.
redundancy-history Displays the state transition history of the switch.
redundancy-members Displays redundancy group members in detail.
role Configure role parameters
rtls Real Time Locating System commands
service-list List of services
snmp Display SNMP engine parameters
snmp-server Display SNMP engine parameters
spanning-tree Displays spanning-tree information.
static-channel-group Displays static channel group membership.
terminal Displays terminal configuration parameters.
timezone Displays the timezone.
traffic-shape Display traffic shaping
users Displays information about terminal lines.
version Displays the software and hardware version.
virtual-ip IP Redundancy Feature
wireless Displays wireless configuration commands.
wlan-acl Displays WLAN based ACL information.