Redundancy-history – Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) User Manual
Page 87
Advertising
Brocade Mobility RFS7000-GR Controller CLI Reference Guide
73
53-1001945-01
show
2
redundancy-history
Common to all modes
This command displays the history of the state transition by the Brocade Mobility RFS7000-GR
Controller. In a cluster, this command displays the history of the switch state transitions of the
self-switch.
Syntax
show redundancy-history
Parameters
None.
Example
RFS7000(config)#show redundancy-history
State Transition History
Time Event Triggered State
---------------------------------------------------------
Sep 18 09:57:36 2007 Redundancy Enabled
Startup
Sep 18 09:57:36 2007 Startup Done
Startup
Sep 18 09:57:36 2007 Discovery Done
Startup
Sep 18 09:57:36 2007 Redundancy Disabled
Startup
RFS7000(config)#
Advertising