Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 247)

Brocade Mobility RFS7000-GR Controller CLI Reference Guide 233
53-1001945-01
Global Configuration Commands
5
wireless
Global Configuration Commands
Use this command to configure switch wireless parameters. This command leads moves to the
config-wireless
instance. For additional information, see Wireless Instance on page 483 .
Syntax
wireless
Parameters
None.
Usage Guidelines
The wireless command is used to enter the config-wireless instance. The prompt changes from the
regular
RFS7000(config)#
to
RFS7000(config-wireless)#.
Example
RFS7000(config)#wireless
RFS7000(config-wireless)#