Basler Electric DGC-2020HD - Manual (Page 210)

200 9469300990 Rev B
These screens allow the user to edit general settings, communications, system parameters,
programmable inputs, programmable outputs, alarm configuration, generator protection, breaker
management, programmable senders, and BESTlogicPlus programmable logic.
Logic setup will be necessary after making certain setting changes. For more information, refer to the
BESTlogicPlus chapter.
Metering Explorer
The Metering Explorer is a convenient tool within BESTCOMSPlus used to navigate through the various
metering screens of the DGC-2020HD plugin.
These screens allow the user to view real-time system data including generator voltages and currents,
input/output status, alarms, reports, and other parameters. Refer to the Metering chapter for more
information on the Metering Explorer.
BESTspace
™
BESTspace provides the ability to manage customized workspaces. A workspace consists of the position
and size of all open screens within BESTCOMSPlus. Pre-saved workspaces can be quickly loaded to fit
the specific task at hand. Any number of different workspaces can be saved including a default
workspace which loads when the DGC-2020HD plug-in is started. Metering Explorer screens and Settings
Explorer screens can be saved independently into the workspace file. A Comments box is provided for
writing a description or leaving notes for each saved workspace. To access BESTspace, click View (on
the lower menu bar) and hover over BESTspace. Figure 141 illustrates the BESTspace options found
under the View pull-down menu. Figure 142 illustrates the options included in the Load/Save Workspace
File screen.
Figure 141. View Menu, BESTspace™ Options
Figure 142. View Menu, BESTspace™, Save Workspace Screen
BESTCOMSPlus
® Software
DGC-2020HD