Basler Electric DGC-2020HD - Manual (Page 83)

9469300990 Rev B 73
Figure 30. Settings Explorer, Programmable Outputs, Contact Outputs
Configurable Elements
BESTCOMSPlus ® Navigation Path: Settings Explorer, Programmable Outputs, Configurable Elements
Front Panel Navigation Path: Settings Explorer > Programmable Outputs > Configurable Elements
Configurable elements are connected to the logic scheme as outputs. The configurable elements are
incorporated into a BESTlogicPlus programmable logic scheme by selecting them from the Elements
group in BESTlogicPlus. For more details, refer to the BESTlogicPlus chapter. Each of the eight elements
can be independently configured to annunciate an alarm or pre-alarm. A user-adjustable time delay can
be set to delay recognition of an element. By default, all elements are configured so that they do not
trigger an alarm or pre-alarm. To make identifying an element easier, each of the elements can be given a
user-assigned name. If used for an alarm or pre-alarm, the user-assigned name appears in the alarm or
pre-alarm annunciation and in the DGC-2020HD event log. Elements can be recognized always or only
while the engine is running. Configurable element status is available in BESTlogicPlus Programmable
Logic when “Status Only” is selected for Alarm Configuration. Configurable element status can be used as
logic inputs to drive other logic in the program, similar to logic control relays.
The BESTCOMSPlus Configurable Elements screen is illustrated in Figure 31. Settings are listed in Table
33.
DGC-2020HD Contact Outputs