Relay control settings – Basler Electric DGC-2020HD User Manual
Page 282
Advertising
272
9469300990 Rev B
Figure 174. Settings Explorer, System Parameters, Sensing Transformers
Relay Control Settings
BESTCOMSPlus Navigation Path: Settings Explorer, System Parameters, Relay Control
Front Panel Navigation Path: Settings > System Parameters > Relay Control
The default operational setting for the Start, Run, and Pre-start relays is Predefined or standard. Any of
these relays can be logic driven by selecting the Programmable setting. Logic driven programmable
relays must be set up using BESTlogicPlus
Figure 175 illustrates the BESTCOMSPlus Relay Control screen.
Figure 175. Settings Explorer, System Parameters, Relay Control
Configuration
DGC-2020HD
Advertising