Festo Кабели и принадлежности - Manual (Page 111)

3. Installation
3−33
Festo P.BE−SPC200−EN en 0901d
Plug for axis interface string (X1)
Caution
Use the special cables from Festo (type KSPC−AIF−...)
forĂconnecting the axis interface. Note the maximum
permitted cable lengths on the axis interface string
(see section 3.6).
You can then avoid functional faults on the SPC200 and on
the modules connected to the axis interface string.
The bus signals, the operating voltage and the load voltage
for the connected field devices are provided via the 5−pin
plug of the power supply module.