Festo Кабели и принадлежности User Manual
Page 132
3. Installation
3−54
Festo P.BE−SPC200−EN en 0901d
Special accessories are available here for CP input modules.
A terminating resistor is already incorporated in the I/O funcĆ
tion module.
5. Maximum permitted cable lengths
If the following cable lengths are exceeded, the external
load voltage supply must be installed in front of the relĆ
evant module. Instead of a CP valve terminal, a CP output
module type CP−A08−M12 can also be installed.
SPC−AIF−SUP−24V
SPC200
SPC−AIF−...
SPC−FIO−2E/2A
CPV−...−VI−FB−... ³
)
SPC200
SPC−AIF−...
CP−E16−M...
max. 8 m
1)
max. 8 m
max. 2 m
1)
max. 8 m
1)
max. 8 m
1
)
Without external load voltage supply
2)
Without external load voltage supply only type CPV10−VI−FB−6 or
type CPV14−VI−FB−6 is permitted
Fig. 3/21: Maximum permitted cable lengths on the axis
interface string (one axis)