Festo Кабели и принадлежности - Manual (Page 367)

8. Diagnosis and error treatment
8−11
Festo P.BE−SPC200−EN en 0901d
Axis identifier With axis−related faults the axis identifer indicates the axis on
which the fault has occurred. Meaning:
Axis identifier Description
0 Fault is not axis−related (system fault)
1 Fault with the X−axis
2 Fault with the Y−axis
3 Fault with the Z−axis
4 Fault with the U−axis
Fault number and
additional information The fault number describes the source of the fault. With
some fault numbers, additional information is output in the
form of a three−figure hexadecimal number which contains
further important instructions on localizing the fault.