Festo Кабели и принадлежности - Manual (Page 418)

A. Notes on installing the pneumatic components
A−26
Festo P.BE−SPC200−EN en 0901d
Case A:
The centre of gravity of the mass load lies outside the
rotary axis (output drive shaft of the DSMI−...)
· Only the vertical mounting position is permitted. The outĆ
put drive shaft points vertically upwards or downwards.
The load is moved only in a horizontal plane.
1
Centre of gravity
of the mass load
1
1
Fig. A/17: Permitted mounting position for case A
Case B:
The centre of gravity of the mass load lies in the rotary axis
(output drive shaft of the DSMI−...)
ć Any mounting position is permitted (horizontal, vertical or
diagonal).
1
Centre of gravity
of the mass load
1
Fig. A/18: Any mounting position for case B