Festo Кабели и принадлежности User Manual
Page 222
6. Operating the SPC200 with the control panel
6−10
Festo P.BE−SPC200−EN en 0901d
By pressing the button
{ or }Ăyou can access the individĆ
ual menus from the basic setting one after the other. The
menu name is displayed in the bottom line. The top line still
shows the text from the basic setting (SPC200...). This will
remind you that you are in the first level.
The top line is an orientation aid for your selection. It shows,
e.g. the menu which you have accessed. The bottom line
offers the selection possibilities of the current menu. The
selection possibility is represented by the character
>
.
If you have made a selection by pressing the Enter button,
the text in the display will roll upwards.
1
Display from the
basic setting
(first level)
2
The menu AXIS
PARAM. can be
opened with the
Enter button
3
Menu AXIS
PARAM. is open
4
Axis identifier,
selection with
vV
5
First parameter of
the selected axis
SPC200 READY
AXIS PARAM. >
Enter
1
2
3
4
5
Enter
AXIS PARAM.
X:
AXIS PARAM.
CYL. TYPE >
3
Fig. 6/5:
Functions of the display lines