Festo Кабели и принадлежности - Manual (Page 355)

7. Description of the commands
7−89
Festo P.BE−SPC200−EN en 0901d
#LR Load register
ć permitted in operating modes: Start/Stop
Nn #LR<Register> = <Value>
<Register> n Number of the register into which the value is
loaded n = 0 ... 99
<Value> n Value which is loaded into the specified register n =
−32768 ... 32767
Rn Register Rn contains the value which is loaded into
the specified register n = 0 ... 99
Effect The value specified with n is loaded into the register.
Example N011 #LR1=100 ;Load value 100 into register 1
Remark Registers are remanent.
#AR Add to register
ć permitted in operating modes: Start/Stop
Nn #AR<Register> = <Value>
<Register> n Number of the register into which the value is
loaded n = 0 ... 99
<Value> n Value which is loaded into the specified register n =
−32768 ... 32767
Rn Register Rn contains the value which is loaded into
the specified register n = 0 ... 99
Effect The contents of the register are added with the specified value.
Example N010 #LR0=0
N011 #AR0=1
;Delete register 0
;Increase register 0 by 1
Remark Registers are remanent.