Festo Кабели и принадлежности - Manual (Page 35)

1. Summary of components
1−11
Festo P.BE−SPC200−EN en 0901d
A system with the modules mentioned above offers the
following scope of performance:
ć up to two pneumatic axes can be controlled
ć various measuring system types can be connected due to
different variants of the axis interface
ć independent operation or coordination with external
PLC/IPC via I/Os
ć programming and operation via a PC or a control panel.
Extension modules The modules listed in the following table are available for
extending the system:
Module Description
Analogue input
module With this module you can specify anaĆ
logue nominal position values. The modĆ
ule has two analogue input channels for
this purpose. The permitted voltage range
is 0...10 V.
I/O module Provides further freely programmable
I/Os. The SPC200 supports maximum
4ĂI/O modules.
Sub−controller module Enables two further pneumatic axes and
further I/O modules to be connected.
The module provides here the necessary
computer output as well as a connection
for a further axis interface string.