RKI Instruments EAGLE 2 Manual - Manual (Page 112)

102 • Tips for Using Setup Mode EAGLE 2 Operator’s Manual
• turn the confirmation alert feature on or off
• turn the password feature on or off and set the password
• reset the instrument parameters to their default settings
• turn the lunch break function on or off
• turn the span factor on or off
• select the language
• return to normal operation
The EAGLE 2 is factory-set to suit most applications. Update settings in
Setup Mode only if required for your specific application. The description of
each item below indicates the factory setting for each item.
Tips for Using Setup Mode
• When in the main menu, the cursor (>) flashes in front of a menu item
indicating that the item is selected.
• Use the RANGE ▼ SHIFT button to move the cursor down through the
main menu and submenu items, and to lower values or change the setting
in a specific option.
• Use the AIR ▲ YES button to move the cursor up through the main menu
and submenu items, and to raise values or change the setting in a specific
option.
• A down arrow in the lower right corner or an up arrow in the upper right
corner of the LCD indicates that additional menu items can be viewed by
pressing and releasing the RANGE ▼ SHIFT button in the case of the
down arrow or the AIR ▲ YES button in the case of the up arrow. The
example below illustrates a down arrow in the lower right corner.
• Use the POWER ENTER RESET button to enter a selected menu item
with the cursor next to it and to enter and save settings during
programming.
• An adjustable parameter that is flashing can be adjusted with the AIR ▲
YES and RANGE ▼ SHIFT buttons.
>SET DATE & TIME
SET DATE FORMAT
SET BATTERY TYPE
CONFIGURE CHANNELS
CONFIGURE GASES
CATALYTIC UNITS