RKI Instruments EAGLE 2 Manual - Manual (Page 59)

EAGLE 2 Operator’s Manual Display Mode • 49
user IDs stored in the EAGLE 2, see the Eagle 2 Maintenance Data Loader
Program Operator’s Manual.
To select a different user ID:
1. With the Select User ID Screen displayed, press and release the AIR ▲
YES button. A screen appears that includes the current user ID which is
indicated by the cursor next to it.
The user IDs are displayed in groups of six. The previous group of six is
displayed when the cursor is moved up past the top of the LCD. The next
group of six is displayed when the cursor is moved down past the bottom
of the LCD. The list will not “wrap around” to the previous screen if the
cursor is moved up from the first user ID or to the next screen if the
cursor is moved down from the last user ID. Any of the user IDs in the
list that have not been changed from the factory setting will be shown as
dashes (-).
2. Use the AIR ▲ YES and RANGE ▼ SHIFT buttons to move the cursor
up and down the screen and scroll through the available user IDs to find
the desired user ID.
3. When the desired user ID is displayed, place the cursor next to it, press
and release the POWER ENTER RESET button.
NOTE: To exit the selection screen without saving a change, press and
release the DISPLAY ADJUST NO button. You will return to the
Select User ID screen without saving the user ID change.
4. The unit will save the selected user ID as the current one and proceed to
the Select Station ID Screen.
Bruce
> John
Mike
----------------
----------------
----------------