Carrier 17/19EX - Manual (Page 78)

Note: This schedule is for illustration only, and is not intended to be a recommended schedule
for chiller operation.
Whenever the chiller is in the LOCAL mode, the machine uses Occupancy Schedule 01.
The Ice Build Time Schedule is Schedule 02. When in the CCN mode, Occupancy Schedule
03 is used.
The CCN schedule number is defined on the Config table in the Equipment Configuration
table. The schedule number can change to any value from 03 to 99. If this schedule number is
changed on the Config table, the operator must use the Attach to Network Device table to
upload the new number into the Schedule screen. See Figure 17 .