H3C Technologies H3C MSR 50 - Manual (Page 117)

96
a. Click the Service tab.
b. Select Access Service > Service Configuration from the navigation tree.
c. Click Add.
d. On the page that appears, set the service name to mac, keep the default values for other
parameters, and click OK.
Figure 79 Adding a service
3. Add an account:
a. Click the User tab.
b. Select User > All Access Users from the navigation tree.
c. Click Add.
d. On the page that appears, enter username 00-14-6c-8a-43-ff, set the account name and
password both to 00-14-6c-8a-43-ff, select the service mac, and click OK.
Figure 80 Adding an account
Configuring the RADIUS server (IMCv5)
The following takes the IMC (the IMC versions are IMC PLAT 5.0 and IMC UAM 5.0) as an example to
illustrate the basic configurations of the RADIUS server.
1. Add an access device:
a. Click the Service tab.
b. Select User Access Manager > Access Device Management > Access Device from the
navigation tree.