Setting wlan interface parameters – H3C Technologies H3C MSR 50 User Manual

Page 61

Advertising
background image

40

Item Description

End IP Address

IMPORTANT:

If the extended address pool is configured on an interface, when a DHCP client's request

arrives at the interface, the server assigns an IP address from this extended address pool

only. The client cannot obtain an IP address if no IP address is available in the extended
address pool.

Gateway IP
Address

Specify a gateway IP address in the DHCP address pool for DHCP clients.
When accessing a server or host that is not in its network segment, a DHCP client needs

the gateway to forward data for it. When you specify a gateway IP address in the

address pool, the DHCP server sends an IP address as well as the gateway IP address to
a requesting client.

DNS Server 1

Specify a DNS server IP address in the DHCP address pool for DHCP clients. Note that
DNS server 1 is used before DNS server 2.
To allow DHCP clients to access the Internet through domain names, the DHCP server
needs to send an IP address as well as a DNS server IP address to clients.

DNS Server 2

Setting WLAN interface parameters

After finishing the previous configuration, click Next.

Figure 26 Setting WLAN parameters

Table 23 Configuration items

Item Description

WLAN Setting

Select whether to make WLAN settings.

Advertising
This manual is related to the following products: