H3C Technologies H3C MSR 50 - Manual (Page 226)

205
a. From the navigation tree, select Advanced > DNS Setup > DNS Configuration to enter the
configuration page, as shown in Figure 214 .
b. Select Enable for Dynamic DNS.
c. Click Apply.
Figure 214 Enabling dynamic domain name resolution
2. Specify the DNS server address:
a. Click Add IP to enter the page as shown in Figure 215 .
b. Enter 2.1.1.2 in DNS Server IP Address.
c. Click Apply.
Figure 215 Specifying the DNS server address
3. Configure the domain name suffix:
a. Click Add Suffix to enter the page as shown in Figure 216 .
b. Enter com in DNS Domain Name Suffix.
c. Click Apply.