Adsl/g.shdsl interface – H3C Technologies H3C MSR 50 User Manual
Page 55
34
ADSL/G.SHDSL interface
Figure 20 Setting ADSL/G.SHDSL parameters
Table 14 Configuration items (in IPoA mode)
Item Description
WAN Interface
Select the ADSL/G.SHDSL interface to be configured.
Connect Mode: IPoA
Select the IPoA connect mode.
PVC
Specify the VPI/VCI value for PVC.
TCP-MSS
Set the maximum TCP segment length of an interface.
MTU
Set the MTU of an interface.
IP Address
Specify the IP address of the ADSL/G.SHDSL interface.
Subnet Mask
Select a subnet mask for the ADSL/G.SHDSL interface.
Map IP
Specify the peer destination IP address of the mapped PVC.
Table 15 Configuration items (in IPoEoA mode)
Item Description
WAN Interface
Select the ADSL/G.SHDSL interface to be configured.
Connect Mode: IPoEoA
Select the IPoEoA connect mode.
PVC
Specify the VPI/VCI value for PVC.
TCP-MSS
Set the maximum TCP segment length of an interface.
MTU
Set the MTU of an interface.
IP Address
Specify the IP address of the ADSL/G.SHDSL interface.
Subnet Mask
Select a subnet mask for the ADSL/G.SHDSL interface.
Table 16 Configuration items (in PPPoA mode)
Item Description
WAN Interface
Select the ADSL/G.SHDSL interface to be configured.