Configuring router b – H3C Technologies H3C MSR 50 User Manual

Page 415

Advertising
background image

30

4.

Configure a static route from Router A through interface Tunnel0 to Group 2:

a.

Select Advanced > Route Setup from the navigation tree.

b.

Click the Create tab and then perform the configurations shown in

Figure 396

.

c.

Enter 10.1.3.0 as the destination IP address.

d.

Enter mask 24.

e.

Select the box before Interface, and then select egress interface Tunnel0.

f.

Click Apply.

Figure 396 Adding a static route from Router A through interface Tunnel 0 to Group 2

Configuring Router B

1.

Configure an IPv4 address for interface Ethernet 0/0:

a.

Select Interface Setup > WAN Interface Setup from the navigation tree.

b.

Click the

icon for interface Ethernet 0/0 and then perform the configurations shown

in

Figure 397

.

c.

Select Manual for Connect Mode.

d.

Enter IP address 10.1.3.1.

e.

Select IP mask 24 (255.255.255.0).

f.

Click Confirm.

Advertising
This manual is related to the following products: