Configuring host resources – H3C Technologies H3C MSR 50 User Manual

Page 434

Advertising
background image

49

Figure 417 Global configuration page

2.

Configure the global parameters as described in

Table 174

.

3.

Click Apply.

Table 174 Configuration items

Item Description

Start IP

Specify the IP address pool from which the gateway assigns IP addresses for clients'
virtual network adapters.

End IP

Subnet Mask

Enter the subnet mask to be assigned to a client's virtual network adapter.

Gateway IP

Enter the default gateway IP address to be assigned to a client's virtual network
adapter.

Timeout

Set an idle timeout for client connections. If the gateway does not receive any packet
from a client during this period, the gateway disconnects the client.

WINS Server IP

Enter the WINS server IP addresses to be assigned to clients' virtual network adapters.

DNS Server IP

Enter the DNS server IP addresses to be assigned to clients' virtual network adapters.

Allow clients to
intercommunicate

Select this item to allow IP access between online users.

Permit only access to
VPN

Select this item to allow online users to access only the VPN.
If you do not select this item, online users can access both the VPN and the Internet.

Show Network
Services by

Specify how to display network services for online users.

Description: Shows the description information of the network services that host

resources allow users to access.

IP address: Shows the destination address, subnet mask, and protocol type of the

network services that host resources allow users to access.

Configuring host resources

1.

Select VPN > SSL VPN > Resource Management > IP Network from the navigation tree.

2.

Click the Host Configuration tab to view existing host resources.

Advertising
This manual is related to the following products: