H3C Technologies H3C MSR 50 - Manual (Page 564)

179
Trunk routing
You can connect devices to the PBX on the PSTN network through FXO, E&M, VE1, VT1, and BSV trunk
lines. Among them, VE1 and VT1 trunk routing enables the device to provide more voice communication
channels. Therefore, it greatly increases device usage and broadens the service range.
See Configuring trunking mode calling for the configuration example of using the trunking routing as the
call route type.
Basic settings
Configuring a local number
Select Voice Management > Local Number from the navigation tree, and click Add to access the page for
creating a local number, as shown in
Figure 574 .
Figure 574 Local number configuration page