H3C Technologies H3C MSR 50 - Manual (Page 405)

20
Item Description
End IP
The number of addresses between the start IP address and end IP address
must not exceed 1024. If you specify only the start IP address, the IP address
pool will contain only one IP address, namely, the start IP address.
Displaying L2TP tunnel information
1. Select VPN > L2TP > Tunnel Info from the navigation tree to enter the L2TP tunnel information page.
Figure 381 L2TP tunnel information
2. View the L2TP tunnel information.
Table 164 Field description
Field Description
Local Tunnel ID Local ID of the tunnel.
Peer Tunnel ID Peer ID of the tunnel.
Peer Tunnel Port Peer port of the tunnel.
Peer Tunnel IP Peer IP address of the tunnel.
Session Count Number of sessions on the tunnel.
Peer Tunnel Name Peer name of the tunnel.
Client-initiated VPN configuration example
Network requirements
As shown in Figure 382 , a VPN user accesses the corporate headquarters as follows:
1. The user first connects to the Internet, and then initiates a tunneling request to the LNS directly.
2. After the LNS accepts the connection request, an L2TP tunnel is set up between the LNS and the
VPN user.
3. The VPN user communicates with the headquarters over the tunnel.