Sip local survival configuration examples, Network requirements, N in – H3C Technologies H3C MSR 50 User Manual
Page 773: Figure 773
388
Figure 773 Applying the call rule set
Table 285 Configuration items
Item Description
Rule Set ID
Displays the call rule set ID.
Applied Globally
•
Enable—Applies the call rule set to all registered users.
•
Disable—Specifies that the call rule set does not apply to any registered users.
Register users bound to
the rule set
•
In the Available register users field, select registered users and click << to add
them to Register users bound to the rule set.
•
In the Register users bound to the rule set field, select registered users and
click >> to unbind them.
Users in the Available register users field are added in
.
SIP local survival configuration examples
Configuring local SIP server to operate in alone mode
Network requirements
Configure the local SIP server on Router C to operate in alone mode so that the phones register with the
local SIP server and they can make and receive calls through the local SIP server.