Configuring wan interfaces, Configuring an ethernet interface – H3C Technologies H3C MSR 50 User Manual
Page 64
43
Configuring WAN interfaces
This chapter describes how to configure the following interfaces on the Web interface:
•
Ethernet interfaces.
•
SA interfaces.
•
ADSL/G.SHDSL interfaces.
•
CE1/PRI interfaces.
•
CT1/PRI interfaces.
Configuring an Ethernet interface
An Ethernet interface or subinterface supports the following connection modes:
•
Auto—The interface acts as a DHCP client to get an IP address through DHCP.
•
Manual—The IP address and subnet mask are configured manually for the interface.
•
PPPoE—The interface acts as a PPPoE client. PPPoE provides access to the Internet for hosts in an
Ethernet through remote access devices. It also implements access control and accounting on a
per-host basis. As it is cost-effective, PPPoE gains popularity in various applications, such as
residential networks.
To configure an Ethernet interface:
1.
Select Interface Setup > WAN Interface Setup from the navigation tree.
Figure 28 WAN interface configuration page
2.
Click the
icon for the Ethernet interface.
3.
Configure the Ethernet interface, as described in
, and
.