H3C Technologies H3C MSR 50 - Manual (Page 169)

148
Figure 149 Configuring an internal server
3. Configure the parameters as described in Table 87 .
4. Click Add.
Table 87 Configuration items
Item Description
Interface Specify an interface on which the NAT policy is to be enabled.
Protocol Specify the type of the protocol carried by IP, which can be TCP or UDP.
Global IP Address
Specify the public IP address for the internal server.
You can use the IP address of the current interface, or manually specify an IP address.
Global Port
Specify the global port number for the internal server.
From the list, you can:
• Select Other and then enter a port number. If you enter 0, all types of services are
provided. That is, only a static binding between the external IP address and the
internal IP address is established.
• Select a service and the corresponding port number is provided. You cannot modify
the port number displayed.
Host IP Address Specify the internal IP address for the internal server.