Configuration procedure, Configuring a ce1/pri interface in e1 mode – H3C Technologies H3C MSR 50 User Manual
Page 73
52
Configuration procedure
To configure a CE1/PRI interface:
1.
Select Interface Setup > WAN Interface Setup from the navigation tree.
2.
Click the
icon for the CE1/PRI interface.
3.
Configure the CE1/PRI interface, as described in "Configuring a CE1/PRI interface in E1 mode"
and "Configuring a CE1/PRI interface in CE1 mode."
Configuring a CE1/PRI interface in E1 mode
Figure 32 Configuring a CE1/PRI interface in E1 mode
Table 32 Configuration items (in E1 mode)
Item Description
WAN Interface
Displays the name of the CE1/PRI interface to be configured.
Interface Status
Display and set the interface status:
•
Connected—Indicating that the current interface is up and connected, click
Disable to shut down the interface.
•
Not connected—Indicating that the current interface is up but not connected,
click Disable to shut down the interface.
•
Administratively Down—Indicating that the current interface is shut down by a
network administrator, click Enable to bring up the interface.
Work Mode: E1
Select E1 as the operating mode.
User Name
Configure the username for authentication.
Password
Displays whether a password is configured for authentication.
If the field displays null, no password is configured for authentication.
New Password
Set or modify the password for authentication.
TCP-MSS
Configure the TCP MSS on the interface.