H3C Technologies H3C MSR 50 - Manual (Page 278)

257
QoS configuration examples
Subnet limit configuration example
Network requirements
As shown in Figure 256 , limit the rate of packets leaving Ethernet 1/1 of Router.
Perform per-IP rate limiting for traffic sourced from Host A through Host Z, which are on the network
segments 2.1.1.1 through 2.1.1.100, with the per-IP limit being 5 kbps.
Figure 256 Network diagram
Configuration procedure
# Configure the bandwidth limit settings for the network segment.
1. Select Advance > QoS Setup > Subnet Limit from the navigation tree, and click Add on the
displayed page.
Figure 257 Configuring subnet limit