H3C Technologies H3C MSR 50 - Manual (Page 398)

13
Enabling L2TP
1. Select VPN > L2TP > L2TP Config from the navigation tree to enter the L2TP configuration page, as
shown in
Figure 377 .
2. On the upper part of the page, select the box before Enable L2TP.
3. Click Apply.
Figure 377 L2TP configuration page
Adding an L2TP group
1. Select VPN > L2TP > L2TP Config from the navigation tree to enter the L2TP configuration page, as
shown in Figure 377 .
2. On the lower part of the page, click Add to add an L2TP group.