H3C Technologies H3C MSR 50 - Manual (Page 119)

98
Figure 83 Adding an account
Verifying the configuration
During authentication, the user does not need to input the username or password. After passing MAC
authentication, the client can associate with the device and access the WLAN. You can view the online
clients by selecting Interface Setup > Wireless > Summary from the navigation tree and then clicking the
Client tab.
Remote 802.1X authentication configuration example
Network requirements
Use IMC as a RADIUS server for AAA. On the RADIUS server, configure the client’s username as user,
password as dot1x, and shared key as expert. The IP address of the RADIUS server is 10.18.1.88.
On the device, configure the shared key as expert, and configure the device to remove the domain name
of a username before sending it to the RADIUS server. The IP address of the device is 10.18.1.1.
Figure 84 Network diagram
Configuring the router
1. Configure wireless service:
a. Select Interface Setup > Wireless > Access Service from the navigation tree.
b. Click Add.