Rockwell Automation 25B PowerFlex 520-Series Adjustable Frequency AC Drive User Manual User Manual
Powerflex 520-series adjustable frequency ac drive
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- 520-UM001G-EN-E PowerFlex 520-Series Adjustable Frequency AC Drive User Manual
- Important User Information
- Summary of Changes
- Overview
- Installation/Wiring
- Mounting Considerations
- AC Supply Source Considerations
- General Grounding Requirements
- Fuses and Circuit Breakers
- Power and Control Module
- Control Module Cover
- Power Module Terminal Guard
- Power Wiring
- Power Terminal Block
- Common Bus/Precharge Notes
- I/O Wiring
- Control I/O Terminal Block
- Start and Speed Reference Control
- CE Conformity
- Start Up
- Programming and Parameters
- About Parameters
- Parameter Groups
- Basic Display Group
- Basic Program Group
- Terminal Block Group
- Communications Group
- Logic Group
- Advanced Display Group
- Advanced Program Group
- Network Parameter Group
- Modified Parameter Group
- Fault and Diagnostic Group
- AppView Parameter Groups
- CustomView Parameter Group
- Parameter Cross Reference by Name
- Troubleshooting
- Drive Status
- Faults
- Fault Descriptions
- Common Symptoms and Corrective Actions
- Motor does not Start.
- Drive does not Start from Start or Run Inputs wired to the terminal block.
- Drive does not respond to changes in speed command.
- Motor and/or drive will not accelerate to commanded speed.
- Motor operation is unstable.
- Drive will not reverse motor direction.
- Drive does not power up.
- Motor is rotating at zero Hz or slip frequency is not correct.
- Supplemental Drive Information
- Accessories and Dimensions
- RS485 (DSI) Protocol
- Network Wiring
- Parameter Configuration
- Supported Modbus Function Codes
- Writing (06) Logic Command Data
- Writing (06) Comm Frequency Command
- Reading (03) Logic Status Data
- Reading (03) Drive Error Codes
- Reading (03) Drive Operational Values
- Reading (03) and Writing (06) Drive Parameters
- Additional Information
- Velocity StepLogic, Basic Logic and Timer/ Counter Functions
- Encoder/Pulse Train Usage and Position StepLogic Application
- PID Set Up
- Safe-Torque-Off Function
- PowerFlex 525 Safe-Torque- Off Overview
- EC Type Examination Certification
- EMC Instructions
- Using PowerFlex 525 Safe- Torque-Off
- Safety Concept
- Enabling PowerFlex 525 Safe-Torque-Off
- Wiring
- PowerFlex 525 Safe-Torque- Off Operation
- Verify Operation
- Connection Examples
- PowerFlex 525 Certification for Safe-Torque-Off
- EtherNet/IP
- Control Diagrams
- Back Cover