Removing a communication adapter – Rockwell Automation 25B PowerFlex 520-Series Adjustable Frequency AC Drive User Manual User Manual

Page 187

Advertising
background image

Rockwell Automation Publication 520-UM001G-EN-E - September 2014

187

Accessories and Dimensions

Appendix B

3.

Press along the edges of the back cover until it snaps firmly into place.

Removing a Communication Adapter

1.

Insert a finger into the slot at the top of the back cover. Lift to separate the
back cover from the Control Module.

Communication

adapter interface

connector

Advertising
This manual is related to the following products: