Advanced display group – Rockwell Automation 25B PowerFlex 520-Series Adjustable Frequency AC Drive User Manual User Manual
Page 103
Rockwell Automation Publication 520-UM001G-EN-E - September 2014
103
Programming and Parameters
Chapter 3
Advanced Display Group
d360 [Analog In 0-10V]
Related Parameter(s):
Displays the 0-10V analog input as a percent of full scale.
Values
Default:
Read Only
Min/Max:
0.0/100.0%
Display:
0.1%
d361 [Analog In 4-20mA]
Related Parameter(s):
Displays the 4-20 mA analog input as a percent of full scale.
Values
Default:
Read Only
Min/Max:
0.0/100.0%
Display:
0.1%
d362 [Elapsed Time-hr]
Displays the total elapsed powered-up time (in hours) since timer reset. The timer stops when it reaches the maximum value.
Values
Default:
Read Only
Min/Max:
0/32767 hr
Display:
1 hr
d363 [Elapsed Time-min]
,
Displays the total elapsed powered-up time (in minutes) since timer reset. Resets to zero when maximum value is reached and increments
[Elapsed Time-hr] by one.
Values
Default:
Read Only
Min/Max:
0.0/60.0 min
Display:
0.1 min
d364 [Counter Status]
Displays the current value of the counter if enabled.
Values
Default:
Read Only
Min/Max:
0/65535
Display:
1
d365 [Timer Status]
32 bit parameter.
Displays the current value of the timer if enabled.
Values
Default:
Read Only
Min/Max:
0/9999 s
Display:
1 s
32
d367 [Drive Type]
Used by Rockwell Automation field service personnel.
Values
Default:
Read Only
Min/Max:
0/65535
Display:
1