Rockwell Automation 25B PowerFlex 520-Series Adjustable Frequency AC Drive User Manual User Manual
Page 236
Advertising
236
Rockwell Automation Publication 520-UM001G-EN-E - September 2014
Appendix H
EtherNet/IP
IMPORTANT
Regardless of the method used to set the adapter IP address, each node on the
EtherNet/IP network must have a unique IP address. To change an IP address,
you must set the new value and then remove and reapply power to (or reset)
the adapter.
Advertising
This manual is related to the following products: