Rockwell Automation 1766-Lxxxx MicroLogix 1400 Programmable Controllers User Manual User Manual
Page 113
Advertising
Rockwell Automation Publication 1766-UM001H-EN-P - May 2014
71
Using the LCD Chapter 5
• LCD Edit Disable is set to unchecked(disable)
• The TUF element of the LCD Function File is set to 3 to specify the bit
file B3 as the target bit file to monitor on the LCD, as shown in the screen
capture below.
• The controller mode is set to REMOTE RUN.
Advertising
This manual is related to the following products: