Diagnostics for ethernet channel (channel 1) – Rockwell Automation 1766-Lxxxx MicroLogix 1400 Programmable Controllers User Manual User Manual
Page 343
Advertising
Rockwell Automation Publication 1766-UM001H-EN-P - May 2014
303
MicroLogix 1400 Distributed Network Protocol (DNP3) Appendix F
For the elements of the DNP3 Slave Application Layer diagnostic counter
CS0:55 to CS0:69 and CS2:55 to CS2:69, the counter values are available with
the structured display in RSLogix 500/RSLogix Micro software as below.
Diagnostics for Ethernet Channel (Channel 1)
This feature is supported only in MicroLogix 1400 Series B controllers.
Diagnostic Counters and Errors in DNP3 Slave subsystem for the Ethernet
channel are logged in the Data File. The data file is configured in the parameter
Advertising
This manual is related to the following products: