Rockwell Automation 1766-Lxxxx MicroLogix 1400 Programmable Controllers User Manual User Manual

Page 315

Advertising
background image

Rockwell Automation Publication 1766-UM001H-EN-P - May 2014

275

MicroLogix 1400 Distributed Network Protocol (DNP3) Appendix F

The object group of the Device Attribute object is 0. The supported range of the
variation is 211…255.

The R/W property shows if the object is Read Only, Read, or Write. If the R/W
property is writable, the value which was written by DNP3 master device is stored
to non-volatile memory.

The object group of the Device Attribute is 0. The supported range of the
variation is 211…255.

Object Group 0, Variations for Attribute Set 0

Variation

Read
/Write

Attribute
Data Type

Length in
Bytes
(Series A)

Max Length
in Bytes
(Series B)

Description

Value (Series A)

Value (Series B)

211

Read Only

VSTR

27

0 for DNP3

Identifier of support for
user-specific attributes

Returns the identifier
for user-specific
attributes.
"Rockwell
Automation, Inc., 1"

Returns the identifier
for user-specific
attributes.
"", NULL for DNP3.

212

Read Only

UINT

4

2

Number of master-defined
data set prototypes

0

0

213

Read Only

UINT

4

2

Number of
outstation-defined data set
prototypes

0

The configured
number in the DNP3
Slave Application
Layer Configuration
file.
10, max

214

Read Only

UINT

4

2

Number of master-defined
data sets

0

0

215

Read Only

UINT

4

2

Number of
outstation-defined data sets

0

The configured
number in the DNP3
Slave Application
Layer Configuration
file.
10, max

216

Read Only

UINT

4

2

Max number of binary
outputs per request

10

10

217

Read Only

UINT

4

2

Local timing accuracy

10,000 in microseconds

218

Read Only

UINT

4

2

Duration of timing accuracy

0 in seconds

219

Read Only

INT

1

1

Support for analog output
events

0

0

220

Read Only

UINT

4

2

Max analog output index

256*3

221

Read Only

UINT

4

2

Number of analog outputs

0…256*3

222

Read Only

INT

1

1

Support for binary output
events

0

223

Read Only

UINT

4

2

Max binary output index

256*16

224

Read Only

UINT

4

2

Number of binary outputs

0…256*16

225

Read Only

INT

1

1

Support for frozen counter
events

1

226

Read Only

INT

1

1

Support for frozen counters

1

Advertising
This manual is related to the following products: