Rockwell Automation 1766-Lxxxx MicroLogix 1400 Programmable Controllers User Manual - Manual (Page 263)

Rockwell Automation Publication 1766-UM001H-EN-P - May 2014 223
MicroLogix 1400 Distributed Network Protocol (DNP3) Appendix F
Diagnostic File Number in Secure Authentication
This parameter is supported only in MicroLogix 1400 Series B controllers.
The diagnostic file number is used to store the diagnostics for the
troubleshooting of DNP3 Secure Authentication subsystem.
The value of this parameter is N file only. Valid range is 0, 7, 9 to 255. Default
value is 0.
See the table for the contents of the data file in the section Diagnostics.
Default Variation Config File Number
This parameter is supported only in MicroLogix 1400 Series B controllers.
8 Update Key (6) 0 0 0 to 65535
9 Update Key (7) 0 0 0 to 65535
10 User Number 0 0 0 to 65535 For User 2
11 Reserved 0 0 0 For User 1
12 Update Key (0) 0 0 0 to 65535
13 Update Key (1) 0 0 0 to 65535
14 Update Key (2) 0 0 0 to 65535
15 Update Key (3) 0 0 0 to 65535
16 Update Key (4) 0 0 0 to 65535
17 Update Key (5) 0 0 0 to 65535
18 Update Key (6) 0 0 0 to 65535
19 Update Key (7) 0 0 0 to 65535
…
90 User Number 0 0 0 to 65535 For User 10
91 Reserved 0 0 0 For User 10
92 Update Key (0) 0 0 0 to 65535
93 Update Key (1) 0 0 0 to 65535
94 Update Key (2) 0 0 0 to 65535
95 Update Key (3) 0 0 0 to 65535
96 Update Key (4) 0 0 0 to 65535
97 Update Key (5) 0 0 0 to 65535
98 Update Key (6) 0 0 0 to 65535
99 Update Key (7) 0 0 0 to 65535
DNP3 Secure Authentication User Info Configuration File Structure
Word Offset Name Default Value By
Controller (DEC) Default Value By
RSLogix500 (DEC) Valid Range (DEC) Description