Configuring contrast value – Rockwell Automation 1766-Lxxxx MicroLogix 1400 Programmable Controllers User Manual User Manual
Page 156
Advertising
![background image](/manuals/579250/156/background.png)
114
Rockwell Automation Publication 1766-UM001H-EN-P - May 2014
Chapter 5 Using the LCD
Configuring contrast value
1. On the Main Menu screen, select Advanced Set by using the Up and Down
keys on the LCD keypad.
If the menu items shown are not displayed on the Main Menu screen, scroll
down by pressing the Down key.
2. Press the OK key on the LCD keypad.
3. Select LCD Setup, using the Up and Down keys on the LCD keypad.
When the LCD Setup menu screen is displayed, press the OK key.
4. Select Contrast to adjust the contrast of LCD.
5. Adjust the contrast value using the Left and Right keys on the LCD
keypad.
Advertising
This manual is related to the following products: