Dh-485 configuration parameters – Rockwell Automation 1766-Lxxxx MicroLogix 1400 Programmable Controllers User Manual User Manual
Page 85
Advertising
![background image](/manuals/579250/85/background.png)
Rockwell Automation Publication 1766-UM001H-EN-P - May 2014
71
Communication Connections Chapter 4
DH-485 Configuration Parameters
When MicroLogix communications are configured for DH-485, the following
parameters can be changed:
See Software Considerations on page 191 for tips on setting the parameters listed
above.
DH-485 Configuration Parameters
Parameter
Options
Baud Rate
9600, 19.2 KBps
Node Address
1...31 decimal
Token Hold Factor
1...4
Advertising
This manual is related to the following products: