Rockwell Automation 1766-Lxxxx MicroLogix 1400 Programmable Controllers User Manual - Manual (Page 33)

Rockwell Automation Publication 1766-UM001H-EN-P - May 2014 19
Install Your Controller Chapter 2
Connecting the Battery Wire Connector
Follow the procedure below to connect the battery wire connector to the battery
connector.
1. Insert the replaceable battery wire connector into the controller’s battery
connector.
2. Secure the battery connector wires so that it does not block the 1762
expansion bus connector as shown below .
1762 I/O expansion
bus connector
Battery wires
twisted pair
Battery
Battery wire
connector
Battery connector
44522
Battery compartment