Dnp3 slave application layer configuration – Rockwell Automation 1766-Lxxxx MicroLogix 1400 Programmable Controllers User Manual User Manual
Page 242
Advertising
202
Rockwell Automation Publication 1766-UM001H-EN-P - May 2014
Appendix F MicroLogix 1400 Distributed Network Protocol (DNP3)
Link Layer related configuration can also be done in the Chan. 1 - DNP3 tab.
DNP3 Slave Application Layer Configuration
Application Layer related configuration can be done in the DNP3 Slave tab.
Advertising
This manual is related to the following products: