Rockwell Automation 1766-Lxxxx MicroLogix 1400 Programmable Controllers User Manual User Manual
Page 123
Advertising
Rockwell Automation Publication 1766-UM001H-EN-P - May 2014
81
Using the LCD Chapter 5
• LCD Edit Disable is set to unchecked(disable)
• The TUF element of the LCD Function File is set to 9 to specify the
integer file L9 as the target file to monitor on the LCD, as shown in the
screen capture below.
The controller mode is set to REMOTE RUN.
Follow these steps to view and change the data values of the double integer file L9.
Advertising
This manual is related to the following products: